Housing and Building
Braemar World's First Five Star Non-condensing Ducted Gas Heating Range
By
Seeley International
Designed in
Australia
Description
Braemar's new non-condensing technology means we can deliver a five star ducted gas heating range, without producing condensate, so there is no need for a condensate drain, and the size of the cabinet is reduced by 1/3 compared with other five star ducted gas heaters. 
The control system allows the heater to better match the heat output with the heat load. This means that as the heat load varies, the heater output varies. This reduces cycling losses and increases the overall efficiency of the system, resulting in the first 5 star non-condensing ducted gas heater.
Key Features
and/or Benefits
The five star non-condensing ducted gas heating range is 1/3 smaller and easier to install compared with standard five star heaters. This is possible by removing the section in the standard five star model, where the condensate is produced and drained, reducing the size of the heater. With its compact two-piece modular construction and five star energy rating, it features outstanding efficiency and is very economical to run. It is the smallest and most efficient two-piece ducted gas heater available. The compact two-piece modular construction can be split into two parts and easily manoeuvred through a standard manhole.
					With the clever Spectrolink Multizone zoning, you can have different temperatures in up to four separate zones. So the living areas can be warmer than the bedrooms - and you can even switch zones off completely, saving money. Each zone has its own Spectrolink controller (hardwired to the wall), giving you total control over the individual comfort levels throughout your home. With Spectrolink Multizone zoning you can also automatically turn zones on or off up to four times daily.
					Exclusive to Braemar, the Softair™ function delivers continuous warm air and ensures no cold drafts. When the heater is turned on, there is a soft, warm breeze, rather than a blast of cold air through the vents as the heater warms up.
					The InShot Burner™ shapes the flame for maximum heat, minimising gas wastage for higher efficiency. The burners are made of long-life aluminium, reducing maintenance requirements.
					